This index is free and kept up by hand. If it’s useful to you, there’s a tip jar.
Only 136 of the 886 sewing machine repair shop websites we checked post any repair prices. That’s roughly 15%. Among the shops that do, a standard service typically costs $110 for a mechanical machine and $164 for a computerized one. Sergers typically cost $150 and longarm machines $231. A typical diagnostic fee is $47.50, and repair labor typically runs $75 an hour. We collected every price from shop websites on October 10, 2026.
Updated October 10, 2026. Free to reuse with credit (CC BY 4.0).
Just want to know what your repair will cost? Start with our sewing machine repair cost guide.
Most shops don’t post their prices
We opened the website of every independent repair shop listed on Broken Bobbins. 886 sites loaded. Only 136 of them listed even one price for sewing machine service or repair. The rest say “call for a quote” or don’t mention cost at all. So if you’re shopping around, expect to pick up the phone.
Service prices by machine type
Almost every shop that posts prices sets them by the kind of machine. In the chart, the dark line is the typical price, the mustard bar covers the middle half of shops, and the gray line runs from the lowest to the highest price we found.
| Service | Typical price | Most shops | Lowest–highest | Shops |
|---|---|---|---|---|
| Tune-up, mechanical or basic machine | $110 | $87–$140 | $35–$300 | 101 |
| Tune-up, computerized machine | $164 | $126–$184 | $85–$300 | 60 |
| Tune-up, embroidery or sewing/embroidery combo | $165 | $125–$215 | $75–$400 | 46 |
| Serger service | $150 | $110–$170 | $70–$250 | 63 |
| Longarm or mid-arm machine service | $231 | $155–$299 | $125–$400 | 26 |
| Diagnostic or estimate fee | $47.50 | $30–$60 | $15–$125 | 50 |
| Hourly repair labor | $75 an hour | $50–$85 | $25–$140 | 43 |
Prices are labor only; parts are extra. Where a shop listed a range, we used the middle of it. Where it said “from $X,” we used $X.
Diagnostic fees and hourly labor
Real repairs (gears, motors, circuit boards) are almost never listed as flat prices. Shops quote them after they look inside, so what we can show is how they charge for that time. The typical diagnostic fee is $47.50, and at least 12 of the 50 shops that post one say it’s credited toward the repair if you go ahead. The typical hourly rate is $75. A handful of industrial and commercial shops charge $105 to $140 an hour, and we kept them in. Eight shops post a minimum labor charge, typically $50.
Prices by region
No single city had enough shops posting prices to give a fair local number, so we grouped states into the four US Census regions. We show a regional price only where at least 8 shops posted one. The number in brackets is how many shops that is.
| Service | Northeast | Midwest | South | West |
|---|---|---|---|---|
| Mechanical tune-up | $99 (14) | $109 (27) | $100 (29) | $135 (31) |
| Computerized tune-up | $151 (10) | $124 (14) | $139 (12) | $187 (24) |
| Embroidery tune-up | too few | $130 (13) | $170 (15) | $224 (12) |
| Serger service | too few | $125 (17) | $138 (17) | $166 (22) |
| Longarm service | too few | too few | $210 (9) | $250 (11) |
| Diagnostic fee | $49.99 (9) | $49.99 (15) | $45 (17) | $45 (9) |
| Hourly labor | too few | $72 (8) | $65 (12) | $78 (16) |
The West is the most expensive region for every type of machine service. A mechanical tune-up there typically costs $135, against $99 to $109 elsewhere.
Find repair shops near you
Shows the five closest shops in our directory to the middle of your ZIP area. Prices shown above are national and regional; we don’t show a local price because no city had enough shops posting one.
Chains and multi-store dealers
These are kept out of the numbers above, which cover independent shops only.
- Quality Sewing & Vacuum (11 stores in Washington) posts one menu for all stores: basic sewing machines $199, deluxe $299, premium sewing and embroidery machines $399, sergers $249, premium serger or combo $349, longarms $349 without robotics and $449 with, and multi-needle machines $449. It notes final costs vary with parts. (source)
- Moore’s Sewing & Vacuum (Southern California) doesn’t post service prices.
We didn’t find a national service price list from BERNINA, Baby Lock, Janome, Brother or Singer. Dealers set their own prices. You can find authorized service centers on our brand pages.
How we did this
On October 10, 2026, we visited the websites of the 1,113 published listings on Broken Bobbins that have one. Some shops with several locations share a site, which leaves 949 different websites, and 886 of them loaded. On each, we read the home page, up to eight pages about service, repair or pricing, and up to four linked PDF price sheets. We pulled out every dollar amount and then read each one in context by hand. We kept only prices for sewing machine service or repair. We left out machines for sale, classes, longarm quilting services, vacuum repair and alterations.
Each shop counts once per service, so a shop with five locations doesn’t count five times. The typical price is the middle value: half the shops charge less, half charge more. “Most shops” is the middle half. Industrial and commercial shops are included. We show a national price only where at least 20 shops posted one, and a regional price only where at least 8 did. Prices that appear only in images or that load after the page opens weren’t captured, so the real share of shops with posted prices is probably a little higher than 15%.
Download and reuse
You’re welcome to use these numbers in articles, videos or class handouts. They’re licensed CC BY 4.0. Please credit Broken Bobbins and link to this page.
Cite this
Want the short version for your own machine? Read how much it costs to fix a sewing machine.
