How Much Does Sewing Machine Repair Cost?

These numbers are free to use. If they helped, there’s a tip jar.

Most sewing machine repair shops charge about $110 to service a basic mechanical machine and about $164 for a computerized one. Those are the typical prices posted by 136 independent repair shops across the US that list their rates online, checked in October 2026. Sergers run about $150, and a longarm quilting machine about $231. If a shop needs to open the machine to find the problem, expect a diagnostic fee of around $47.50. Some shops take that fee off the bill if you go ahead with the repair.

$110typical tune-up, mechanical machine (101 shops)
$164typical tune-up, computerized machine (60 shops)
$47.50typical diagnostic fee (50 shops)
$75/hrtypical repair labor beyond the tune-up (43 shops)

Typical sewing machine repair prices

Here’s what shops actually post. “Most shops” is the middle half of the prices we found, so a quarter of shops charge less and a quarter charge more.

ServiceTypical priceMost shopsLowest–highestShops
Tune-up, mechanical or basic machine$110$87–$140$35–$300101
Tune-up, computerized machine$164$126–$184$85–$30060
Tune-up, embroidery or sewing/embroidery combo$165$125–$215$75–$40046
Serger service$150$110–$170$70–$25063
Longarm or mid-arm machine service$231$155–$299$125–$40026
Diagnostic or estimate fee$47.50$30–$60$15–$12550
Hourly repair labor$75 an hour$50–$85$25–$14043

Prices are labor only. Parts cost extra almost everywhere. Want every number, the regional breakdown and a downloadable file? See our Sewing Machine Repair Price Index 2026. Need a shop for a special machine? Find embroidery machine repair shops and serger repair shops.

What does a tune-up include?

Shops call it a tune-up, a service, or a “clean, oil and adjust.” It’s the same job. The tech takes the covers off, cleans out lint and old oil, oils the moving parts, balances the thread tension and checks the timing between the needle and the hook. Then they sew a test piece. Some shops point out that a standard service alone fixes a lot of what people bring in as a “repair,” like skipped stitches, thread bunching underneath or a machine that has gotten loud.

So if your machine still runs but sews badly, start by asking for a standard service. It’s usually the cheapest way to find out what’s really wrong.

How much does it cost to fix a sewing machine that’s actually broken?

Real repairs, like a broken gear, a motor that won’t run or a dead circuit board, are almost never posted as flat prices. Shops quote them after they’ve looked inside. What they do post is how they charge for that time:

  • Hourly labor: typically $75 an hour, and most shops fall between $50 and $85. A few industrial and commercial shops charge $105 to $140.
  • Diagnostic or estimate fee: typically $47.50, with most between $30 and $60. At least 12 of the 50 shops that post one say it’s credited toward the repair if you say yes.
  • Minimum charge: the eight shops that post one typically ask about $50, even for a five-minute fix.

A repair is usually the tune-up price plus extra labor and parts. A quote for a mechanical machine with a stripped gear might be the $110 service, an hour or two of labor, and the part.

What makes one repair cost more than another?

The kind of machine

This is the biggest factor by far. Nearly every shop that posts prices sets them by machine type. A computerized machine typically costs about $55 more to service than a mechanical one, because there’s more to take apart and test. Embroidery machines and sewing/embroidery combos land around $165, and the embroidery unit itself is often an add-on. Longarm machines cost the most to service, typically $231, and some shops only service them at your house.

The brand and model

Some dealers price by model series. BERNINA dealers in particular often list higher prices for their larger 7, 8 and 9 series machines. If you own a high-end machine, check whether the shop is an authorized service center for your brand: BERNINA, Brother, Janome, Singer, Baby Lock, PFAFF, Husqvarna Viking and JUKI.

Where you live

Shops in the West post the highest prices. A mechanical tune-up there typically runs $135, compared with about $99 to $109 in the Northeast, Midwest and South. Computerized service shows the same pattern.

Add-ons

Watch for these on the quote:

  • Embroidery unit or module service, usually $40 to $100 on top of the machine
  • Rush or same-day service, usually $20 to $75 extra
  • In-home service calls, which shops list at $129 to $200
  • Pickup and delivery fees, often around $50

Is it worth repairing a sewing machine?

Usually, yes, if the machine was decent to begin with. A standard service costs about $110, and that often solves the problem. Plenty of shops list a separate price for vintage machines like the Singer Featherweight, so age alone isn’t a reason to give up on one.

It gets harder with a low-priced machine that needs a major repair. Here’s a simple rule: if the quote is more than about half of what a comparable new machine would cost, think hard before saying yes. Ask the shop up front. Paying the diagnostic fee gets you a real number, and at some shops that fee comes off the repair bill anyway.

Before you pay for any of it, check the easy stuff. Rethread the top and the bobbin with the presser foot up, put in a new needle, and clean the lint out from under the needle plate. It costs nothing, and sometimes that’s all it takes.

Find a repair shop near you

Broken Bobbins lists more than 1,100 sewing machine repair shops across the US. Search by city, or browse by brand to find an authorized service center. Call ahead and ask for the shop’s current price for your machine. Prices change, and not every shop posts them.

Frequently asked questions

How much is a sewing machine tune-up?

About $110 for a mechanical machine and $164 for a computerized one. Most shops charge between $87 and $140 for mechanical machines and between $126 and $184 for computerized ones. Parts are extra.

How much does it cost to service a serger?

Typically about $150. Most shops charge between $110 and $170. Air-threading and combo serger/coverstitch machines usually sit at the higher end.

Do sewing machine repair shops charge to look at a machine?

Many do. The typical diagnostic or estimate fee is $47.50, and at some shops it comes off the bill if you go ahead with the repair. Ask before you drop the machine off.

What is the hourly rate for sewing machine repair?

Typically $75 an hour. Most shops that post an hourly rate charge $50 to $85.

How often should a sewing machine be serviced?

Shops that mention it usually recommend once a year if you sew regularly. A machine that has been sitting for years should get a service before you use it, because old oil dries out and can stiffen the moving parts.

Prices come from the websites of 136 independent sewing machine repair shops listed on Broken Bobbins, checked October 10, 2026. Typical price is the middle value. See the full price data from 136 shops, by region, including how we collected it.